Anderson Plug Aitai Electronics discusses the development trend. Nowadays, for connector companies, in order to gain a foothold in the connector industry, they must accelerate the pace of industrial adjustment, increase technological innovation and capital investment, in order to produce high-performance connectors that meet market demand and conform to the development of the times. Overall, the overall development characteristics of the connector field are: high-speed, digital, and integrated signal transmission; Small size, narrow spacing, and multifunctional product volume; Convenient plugging and modular combination; Low cost of products. In addition, assembly technology is also required to develop towards surface mount (SMT) and micro assembly (MPT). There are many new industries that have a demand for connectors, many of which have high requirements for connector technology. Faced with the market and technological changes in connectors, China should continuously track the cutting-edge technology of connectors, learn new connector technologies, gradually break away from the competition of mid to low end product types, and develop high-end product lines.

Uniqueness of Anderson plug configuration and incorrect insertion is an erroneous behavior caused by careless operation by staff. This behavior not only leads to equipment malfunction, but also may lead to circuit short circuits in severe cases. Therefore, there are very high requirements for preventing incorrect insertion. According to Mr. Yuan of Baihui Connector, there are two aspects to preventing misinsertion of wire to wire connectors. They are as follows: on the one hand, for the wire to wire connector itself, rotate 180 degrees. If misalignment errors can cause signal connection errors, then it is necessary to pay attention to selecting wire to wire connectors that prevent misinsertion as much as possible to avoid such errors and avoid equipment damage, The use of wire to wire connectors can to some extent avoid the occurrence of such situations with power connectors. Therefore, it is recommended that in order to reduce the variety of materials or save costs for manufacturers, reliable and safe wire to wire connector products should be selected during use, which can provide good protection for their equipment. Configuration uniqueness can also be achieved by adjusting the relative position in the wire to wire connector.

On the other hand, when Anderson plug manufacturers use the same connector, it is likely to connect the A plug to the B socket. This situation requires special attention, as once this situation occurs, the consequences will be very serious, and the AB interface must be connected to a different socket before it can be used.

Although the anti misinsertion effect of wire to wire connectors cannot be completely solved at present, with the development of technology and product updates, high current connectors are believed to have better solutions in the future.